The FURY^TM cision Frac method gives completions engineers the solution they've been seeking: plug-free, low-rate, single-cluster stimulation that drives ~100% frac efficiency at a fraction of today's horsepower. No CT drill-outs. No wasted stages. No massive pad or pumping fleets. Clean, controlled, repeatable.

FURY^TM can reduce completion costs by over $1MM per well, eliminating inefficiencies in the well completion process and helping to bring production online faster, thereby improving well economics.
‍
These efficiencies and cost savings increase E&P earnings and ultimately their market value. The easiest oil has already been produced. Fewer economic barrels remain, and extraction costs will continue to rise. FURY^TM Precision Frac provides a clear path to mitigating those costs.

Technology Overview

Rethinking Frac Completions from First Principles

Conventional plug-and-perf completions are built around the application of huge forces: pump faster, pump harder, set plugs, drill them out later. It works, but it's expensive, inefficient, and wasteful. Worse, most stages are highly inefficient, with perhaps 40% of perforations not taking any fluid. Drill-outs add days and high costs to every well. Massive pump fleets burn fuel and take up large amounts of pad space.

FURY™ Precision Frac takes a fundamentally different approach: single-cluster stimulation while tethered to wireline at low pumping rates with a resettable hydraulic plug and real-time downhole data. No drill-outs. No wasted horsepower. No guesswork.

The Result:

~100% frac efficiency, dramatically lower costs, smaller pad footprint, and a continuous feedback loop that makes every stage smarter than the last.

Performance at a Glance

What Makes FURY^TM Revolutionary

No Fixed Plugs, No CT Drill-Outs

The hydraulically set-and-release plug resets on command. Plug, perf, pump, and repeat. No coiled tubing drill-outs means significant savings per well and days of rig time eliminated to bring wells online.

Single-Cluster Control

Treat one cluster at a time for full interval coverage. No dominant clusters, no wasted stages. Every cluster receives designed stimulation. This is how you achieve ~100% frac efficiency.

Compatible Perforations

Works with any burr-less perforation method. Pair with Precision Perf for optimal results, or integrate with existing perforation systems.

Low-Rate Stimulation

Achieve target bottomhole pressure and fracture geometry at ~1/7th conventional pump rate. Lower rates mean fewer pumps, less fuel, and reduced chemical volumes without sacrificing performance.

Compact Spread

5–7× fewer pump trucks means a fraction of the pad footprint. Lower fuel consumption, reduced emissions, simplified logistics, and significant CAPEX savings for frac service providers.

Live Telemetry

Dual pressure and temperature sensors positioned across the plug capture real-time downhole conditions during every stage. Verify isolation, monitor treatment response, detect anomalies, and optimize on the fly.

How it works

The FURY^TM Precision Frac Workflow

Step 01: Run Wireline Toolstring

Deploy the perforating guns, resettable plug, and dual P/T sensors on wireline. All tools are integrated into a single toolstring for efficient deployment.

Step 02: Perforate

Deploy the perforating guns, resettable plug, and dual P/T sensors on wireline. All tools are integrated into a single toolstring for efficient deployment.

Step 03: Set Plug Below Cluster

Hydraulically set the plug below the
perforated interval and verify isolation with
real-time pressure data.

Step 04: Frac at Lower Rate

Stimulate the isolated cluster at ~10 to 15
bpm (basin-dependent) while monitoring
downhole P/T. Achieve target BHP and
fracture geometry with a fraction of
conventional horsepower.

Step 05: Unset Plug, Flush, Advance, Repeat

Hydraulically release the plug, low-rate flush
to clean the wellbore, advance to the next
cluster, and repeat. Fewer trips. Less wasted
time. No fixed debris left behind.

Technical Specifications

System Components

Resettable Hydraulic Plug: Set and release on command; over 100 cycles per run
Dual P/T Sensors: Real-time pressure and temperature measurement across the plug
Wireline Deployment: Compatible with standard wireline equipment and operations

Operational Parameters

Pump rate: ~10 to 15 bpm (basin-dependent); ~1/7th conventional pumping rates
Plug cycles: Up to 100 cycles per run
Data transmission: Real-time telemetry via wireline

Performance Targets

Frac efficiency: ~100% (full interval coverage)
Placed on Production time: Comparable to conventional multi-cluster pumping
Pump truck requirement: 2 to 3 trucks vs. 15+ conventional

Drill-out elimination: 100% (no fixed plugs left in the wellbore)

The Data Advantage

Every Run Makes Your Completions Smarter

Precision Frac's dual P/T telemetry captures real-time downhole conditions during every stage. This continuous dataset creates a closed feedback loop that enables immediate optimization and long-term learning.

Immediate Benefits:

Verify isolation: Confirm plug set before pumping 
Monitor treatment response: Track downhole pressure and temperature in real time 
Detect anomalies: Identify screen-outs, communication, or equipment issues instantly 
Optimize on the fly: Adjust pump rate, fluid properties, or proppant concentration mid-stage

Immediate Benefits:

Verify isolation: Confirm plug set before pumping 
Monitor treatment response: Track downhole pressure and temperature in real time 
Detect anomalies: Identify screen-outs, communication, or equipment issues instantly 
Optimize on the fly: Adjust pump rate, fluid properties, or proppant concentration mid-stage

The more you run FURY^TM Precision Frac, the smarter your completions become.

The Complete Solution

Integration with BPG Precision Perf

FURY^TM works with any burr-less perforation system, but pairing it with BPG Precision Perf creates a complete end-to-end solution:

BPG Precision Perf

Establishes uniform, cylindrical, burr-less flow paths with larger effective diameters.

Precision Frac

Treats each cluster individually, delivering 100% frac efficiency, leading to higher production opportunities.

See How Precision Frac Reshapes Modern Completions

FURY^TMPrecision Fracdelivers what operators have been asking for: lower costs, higher efficiency, better data, and a smaller footprint. Whether you're planning your next completion or exploring new technologies, we'd like to show you how FURY^TM can transform your operations.

Learn More Contact Now

The New Gold Standard in Completions.